Igwe na-egwu mmiri GHD-V-NC
Usoro GHD-V bụ igwe na-egwupụta oghere enyo kwụ ọtọ.Igwe ndị a na-egwupụta oghere nwere ugegbe kwụ ọtọ site n'iji obere mkpọpu isi.Ọ na-adịrị mịrị mịrị mịrị amị mfe ịchọta site n'otu oghere gaa n'oghere na-esote mgbe a na-edobe iko na kwụ ọtọ kama ịbụ n'ahịrị.Nhazi a na-enyere aka ịkụnye ọtụtụ oghere na otu iko n'ụzọ dị ngwa ngwa na obere ọrụ.Xinology na-enye ụdị abụọ nke igwe na-egwupụta iko kwụ ọtọ.
- Budget vetikal mkpọpu igwe
- N'ihu & azu spindles mkpọpu okpukpu abụọ
- Mpempe mkpọ ala na-agbago na ala n'akụkụ akwa kwụ ọtọ naanị site na ịpị bọtịnụ
- Ntugharị okirikiri iko site na ntuziaka
- Spindles na-agbanwegharị ọsọ nke ihe ntụgharị ugboro ugboro na-achịkwa
- Centre isi mgbapu mmiri jụrụ oyi
- Ọrụ dị mfe
- Mfe ma a pụrụ ịdabere na ya imewe
Ọrụ
- Ibu enyo & bugharịa iko aka n'akụkụ ụgbọ okporo ígwè nkwado ruo mgbe edebanye aha oghere oghere
- Pịa bọtịnụ ịkwaga spindles elu ma ọ bụ ala ruo mgbe edebanye aha oghere kwụ ọtọ
- Tụgharịa wheel aka nri spindles & isi akuakuzinwo ka nke ọma na-eji aka na-abịaru nso ugegbe elu ka ịlele oghere ọnọdụ
- Ọ bụrụ na ndị na-agbapụta isi anaghị adabara ọnọdụ oghere dakọtara, dozie ọnọdụ enyo kwụ ọtọ & n'ọnọdụ kwụ ọtọ ruo mgbe ndị isi ihe na-adakọ n'ọnọdụ oghere.
- Pịa bọtịnụ ka ịgbalite nkwado ịpị iko iji jide iko n'ọnọdụ
- A ga-arụ ọrụ n'azụ spindles & n'ihu spindles n'usoro na-akpaghị aka
Nkọwapụta
| Nr.Nke Drilling Spindles | Otu ụzọ (n'ihu na azụ) |
| Njikwa ọnụọgụgụ NC | Ee |
| PLC | Ee |
| HMI Touch Panel Operator Interface | Ee |
| Nri Spindle Nri azụ | Akpaaka |
| Nri Spindle Drill n'ihu | Akpaaka |
| Ndebanye aha oghere | Akpaaka |
| Oke.Nha iko | 5000 x 2500 mm |
| Min.Nha iko | 500 x 500 mm |
| Ogologo kwụ ọtọ site na Glass Bottom Edge ruo Edge oghere | 80 ~ 2450 mm |
| Ọkpụrụkpụ iko | 5-25 mm |
| Dayameta oghere Glass Drill | Φ4 ~ Φ100 mm |
| Ntụkwasị nke ọma n'oghere oghere | ± 0,50 mm |
| Nkọwapụta nkenke nke ihu na azụ azụ | ± 0.10 mm |
| Ọsọ njem kwụ ọtọ Glass | 0 ~ 5 m/min.(nke servo moto) |
| Ịgba Spindles Up / Down Njem Ọsọ | 0 ~ 4.2 m/min.(nke servo moto) |
| Spindles Ọsọ ntụgharị | A na-ahazi ya site na ntụgharị ugboro ugboro |
| Nri Spindles na-aga n'ihu / azụ azụ | Pneumatic |
| Mmiri jụrụ oyi | Mmiri na-agba n'ime isi dil bit |
| Compress oriri ikuku | 1 Lt/min. |
| Compress ikuku | 0.6 ~ 0.8 MPa |
| Ike | 7.2 kW |
| Voltaji | 380 V / 3 Usoro / 50 Hz (ndị ọzọ na-arịọ) |
| Ibu | 2000 n'arọ |
| Akụkụ Mpụta | 8000(L) x 1200(W) x 3700(H) mm |
