GHD-V-NC Glass Drilling Machine
GHD-V jerin injuna ne na ramukan gilashin tsaye.Injin ɗin suna haƙa ramuka tare da gilashin da aka sanya su a tsaye ta hanyar ɗigon hakowa.Yana da sauƙi don hako igiya don gano wuri daga rami ɗaya zuwa rami na gaba lokacin da aka sanya gilashin a tsaye maimakon a kwance.Wannan zane yana taimakawa wajen tono ramuka da yawa akan gilashin guda ɗaya a cikin sauri da sauri a ƙaramin aiki.Xinology yana ba da nau'i biyu na injin hako gilashin tsaye.
- Budget a tsaye injin hakowa
- Gaba & baya ninki biyu na hakowa spindles
- Tushen hakowa suna motsawa sama da ƙasa tare da gada a tsaye kawai ta latsa maɓallin
- Gilashin a kwance motsi ta hannun hannu
- Spindles saurin jujjuyawar da aka tsara ta hanyar mai sauya mitar
- Cibiya core rawar soja ruwa sanyaya
- Sauƙi aiki
- Simple amma abin dogara zane
Aiki
- Load gilashin & motsa gilashin da hannu tare da dogo na tallafi har sai an yi rajistar matsayi a kwance
- Danna maɓallin don matsar da igiya sama ko ƙasa har sai an yi rajistar matsayi na tsaye
- Juya dabaran hannu don ciyar da igiya & core rawar soja da hannu da hannu gabatowa saman gilashin don duba matsayin rami
- Idan core drillers ba su daidaita & daidaita matsayin rami, daidaita gilashin a kwance matsayi & spindles a tsaye matsayi har core drillers daidaita tare da rami matsayi.
- Maɓallin danna don kunna tallafin latsa gilashi don riƙe gilashi a matsayi
- Rear spindles & gaba spindles za a yi aiki a jere ta atomatik
Ƙayyadaddun bayanai
| Nr.Na Drilling Spindles | Biyu guda (gaba da baya) |
| Ikon Lambobin NC | Ee |
| PLC | Ee |
| HMI Touch Panel Operator Interface | Ee |
| Ciyarwar Dindindin Din Din | Na atomatik |
| Ciyarwar Drill ta gaba | Na atomatik |
| Rijistar Ramuka | Na atomatik |
| Max.Girman Gilashin | 5000 x 2500 mm |
| Min.Girman Gilashin | 500 x 500 mm |
| Nisa Tsaye Daga Gilashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙaƙwalwar Ƙaƙwalwa zuwa Hole Edge | 80 ~ 2450 mm |
| Gilashin Kauri | 5 ~ 25 mm |
| Gilashin Drill Hole Diamita | Φ4 ~ Φ100 mm |
| Daidaitaccen Matsayin Ramuka Haɓaka | ± 0.50 mm |
| Matsakaicin Matsakaicin Matsalolin Gaba & Na baya | ± 0.10 mm |
| Gilashin Gilashin Gudun Balaguro | 0 ~ 5 m/min.(na servo motor) |
| Haɗa Spindles Sama / Sauƙaƙe Gudun Balaguro | 0 ~ 4.2m/min.(na servo motor) |
| Gudun Juyawar Spindles | An daidaita shi ta mai sauya mitar |
| Juya Spindles Gaba / Ciyarwar Baya | Cutar huhu |
| Sanyaya Ruwa | Ruwa yana gudana a cikin core dill bit |
| Damfara Amfani da Iska | 1 Lt/min. |
| Damtse Hawan iska | 0.6 ~ 0.8 MPa |
| Ƙarfi | 7.2 kW |
| Wutar lantarki | 380V / 3 Mataki / 50 Hz (wasu akan buƙata) |
| Nauyi | 2000 kg |
| Girman Wuta | 8000(L) x 1200(W) x 3700(H) mm |
