FRM-2500 CNC Low-E Gilashin Mai Rufe Fim Mai Cire Injin
Siffofin:
1) FRM-2500 CNC Low-E Gilashin Mai Rufe Fim ɗin Cire Injin ɗaukar tsarin sarrafa CNC, saitin siga yana da sauƙi da sauri.
2) Touch allo aiki dubawa, ta atomatik saka idanu da inji Gudun jihar.
3) 4-axis servo Motors motsi tabbatar da daidai matsayi.
4) Jagoran aiki yana da sauƙin saita bisa ga buƙata.
5) Gwajin girman gilashi ta atomatik, babu buƙatar canza dabaran cire fim ɗin da ba daidai ba.
6) Hanyar aikin dabaran a kwance na iya rage sawa dabaran.
7) Naúrar nunin layi yana ba da damar samun sakamako mai cire fim mai kyau.
8) Daidaita matsa lamba ta atomatik na motsi motsi, cimma nasarar cire fim mai kyau.
9) Ta atomatik rarrabe gefen shafi na gilashin mai rufi da gilashin Low-E.Na'ura ce ta zama dole don insulating gilashin naúrar samar da matakin farko na sarrafa injin.
Babban ma'aunin fasaha:
| Tushen wutan lantarki: | 3-lokaci 380/415V 50Hz |
| Max.Girman gilashi | 2500x3000mm |
| Min.Girman gilashi | 300x600mm |
| Asarar Dabarun | 5000 ~ 6000m / inji mai kwakwalwa, fim cire nisa 15mm |
| Gudun juyi na dabaran | 0 ~ 2700 rpm inverter tuki |
| Gilashi tsayin jigilar kaya | 450+/-50mm |
| gilashin kauri | 3 ~ 19mm |
| fim cire nisa | 10 ~ 150 mm |
| Cire sauri | 0 ~ 30m/min (daidaitacce) |
| Daidaito | +/- 0.3mm |
| Matsin iska | 0.6 ~ 0.8MPa |
| Gabaɗaya girma | 8200x1800x3500mm |
